Painted angel wings on wall to your home are a very expensive and labor-intensive job. Fortunately, the appearance of marble can be imitated using color. Marble faux finishing takes a lot of time and practice, but is cheaper than using real marble. Marble faux finishing also requires a step using a brush to apply color. When you try to create the appearance of marble, it’s important to work out to finish the technology on the work surface.
Prepare your work surface and surrounding area for painted angel wings on wall. Cover the furniture and floor with a painter canvas. Use target tape for tape casting and fixtures. Use water and detergents to wash away dirt and debris from your walls. Your walls should be completely clean before painting. Allow the wall to dry. Use a flap and a spackling knife to patch some holes in the wall. Allow spackle to dry. Sand flush against the wall.
12 Picture Gallery: How to Painted Angel Wings on Wall
Prime Work the surface with a latex primer. Allow the primer to dry completely. Use a roller to apply the white base coat. Allow the base coat to dry before the toned white glaze over the base coat. Mix two separate glazes of the same ton. Take a piece of a satin lacquer and mix with some colored glaze and some water. Take some of the other satin painted angel wings on wall and mix with some colored glaze and some water. You will use a dug brush for the brighter color and a sponge for the darker color.
This post topic: Wall Paint